General Information:
The Economy Line of valves offers a reliable low cost,
lightweight and compact alternative to the Industrial Line.
These valves are well suited for humid environments and can be
inexpensively modified to meet specific requirements.
(These
valves are not intended for use in medical life-support, combustion,
aerospace or similar applications)
Mounting Position:
Any Position (best if vertical and
upright)
Actuation Response
Time:
20-30 milliseconds is
typical
Electrical Specifications:
Standard Voltages:
AC 50/60 Hz: 6,
12, 24, 120, 240
DC: 6, 12, 24
DC Latching: 12, 18,
24
Coil Rating:
Continuous duty totally encapsulated
Class
A Rated 105°C; 221°F
Voltage Tolerances:
±10% of applicable voltage
Standard Lead Length: 18" or
24" |
DC
Latching Valves:
2-Wire (std): 30-50 ms pulse is required for activation; a
reversed polarity pulse is required for deactivation. Pulses longer
than 50 ms may cause the valve to re-actuate.
Nominal Ambient Temperature Ranges:
0°C to 49°C; 32°F to 120°F
Enclosure Options:
1/2" FPT Conduit (std) - Epoxy potted coil in a
glass filled polypropylene housing with integral female conduit
connection and 24" leads
1/2" MPT Conduit (120, 240 VAC
std) - Fully molded coil in a Valox housing with integral male
conduit connection (Class F Rated)
Spade Terminals -
Two 1/4" spade terminals integrally molded in a Thermoplastic
Polyester housing and open frame design
Din Connection
- Form "B" style connection
Canister - Epoxy
potted coil in a glass filled nylon canister with two 18" leads
wires
(custom wire configurations available)
Operating Modes Available:
Normally Closed - Closed when de-energized, open
when energized
Normally Open - Open when de-energized,
closed when energized
|
Valve Parts in Contact with Media:
Body - Acetal
(Other body
materials available to meet special requirements)
Base
Nut - Brass (std); S/S on S/S Bodies
Core Tube -
S/S T305
Plunger and Core Plug - S/S
T430F
Shading Ring (AC unites only) - Copper (std);
Silver (special order only)
Springs - S/S
T302
Seals - Nitrile (std)
Options:
• Seals: EPDM, Viton, Silicon, Hydrin, Neoprene
•
Latching Solenoids
Other voltages, coil constructions,
lead lengths and materials are available to meet special
requirements. |
