General Information:
The Economy Line of valves offers a reliable low cost, lightweight
and compact alternative to the Industrial Line. These valves
are well suited for humid environments and can be inexpensively modified
to meet specific requirements.
(These valves are not intended for use in medical life-support,
combustion, aerospace or similar applications)
Mounting Position:
Any Position (best if vertical and upright)
Actuation Response Time:
20-30 milliseconds is typical
Electrical Specifications:
Standard Voltages:
AC 50/60 Hz: 6, 12, 24, 120, 240
DC: 6, 12, 24
DC Latching: 12, 18, 24
Coil Rating:
Continuous duty totally encapsulated
Class A Rated 105°C; 221°F
Voltage Tolerances:
±10% of applicable voltage
Standard Lead Length: 18" or 24"
|
DC Latching
Valves:
2-Wire (std): 30-50 ms pulse is required for activation; a
reversed polarity pulse is required for deactivation. Pulses longer
than 50 ms may cause the valve to re-actuate.
Nominal Ambient Temperature Ranges:
0°C to 49°C; 32°F to 120°F
Enclosure Options:
1/2" FPT Conduit (std) - Epoxy potted coil in a glass filled
polypropylene housing with integral female conduit connection and
24" leads
1/2" MPT Conduit (120, 240 VAC std) - Fully molded coil in
a Valox housing with integral male conduit connection (Class F Rated)
Spade Terminals - Two 1/4" spade terminals integrally molded
in a Thermoplastic Polyester housing and open frame design
Din Connection - Form "B" style connection
Canister - Epoxy potted coil in a glass filled nylon canister
with two 18" leads wires
(custom wire configurations available)
Operating Modes Available:
Normally Closed - Closed when de-energized, open when energized
Normally Open - Open when de-energized, closed when energized
|
Diverting -
Diverts flow from input port to one of two exit ports
Selector - Selects flow from one of two input ports to exit
port
Valve Parts in Contact with Media:
Body - Brass, S/S T303 or 30% Glass Filled Polypropylene
Base Nut - Brass (std); S/S on S/S Bodies
Core Tube - S/S T305
Plunger and Core Plug - S/S T430F
Shading Ring (AC unites only) - Copper (std); Silver (special
order only)
Springs - S/S T302
Seals - Nitrile (std)
Options:
• Seals: EPDM, Viton, Silicon, Hydrin, Neoprene
• Mounting Bracket
Other voltages, coil constructions,
lead lengths and materials are available to meet special requirements.
|
