General Information:
The Industrial Line of Thermo-Polymer Ally valves
provides the highest reliability even under the most demanding of
applications. These valves are well suited for use with salt
water, ozonated water systems, various organic solvents, potable
drinking water systems and high compatibility with various
automotive media. their high tensile strength also makes them
a good replacement for brass or the more expensive stainless steel
valves. the I81 series valves do not require a minimum
operating pressure, which allows them to operate from a "zero" inlet
pressure to the maximum operating pressure differential
(MOPD). These valves also provide a bubble-tight
shutoff.
Mounting Position:
Any Position (best if vertical and
upright)
Actuation Response
Time:
30-50 milliseconds is
typical
Electrical Specifications:
Standard Voltages:
VAC 24/60,
110/50-120/60, 220/50-240/60, 440/50-480/60
VDC:12, 24, 48,
120
|
Coil Rating:
Continuous duty totally encapsulated
Class
F Rated 155°C; 311°F
Voltage Tolerances:
+10%, -15% of applicable voltage
Standard Lead Length: 24"
Nominal Ambient Temperature Ranges:
-40°C to 65.5°C; -40°F to 150°F
Enclosure Options:
NEMA I (std)- Metal Housing
NEMA IV
- Watertight Housing
NEMA VII - Explosion-Proof
Housing
(All options come with 1/2" FPT Conduit
Connection)
DIN
- Form "A" Connection
Operating Modes Available:
Normally Closed - Closed when de-energized, open
when energized
Normally Open - Open when de-energized,
closed when energized
|
Valve Parts in Contact with Media:
Body - Noryl GTX830
Internals
- S/S T316
Core Tube - S/S T305
Plunger
and Core Plug - S/S T430F
Shading Ring (AC unites
only) - Copper (std); Silver (special order
only)
Springs - S/S T302
Seals - Nitrile
(std on Brass valves);
Diaphragm - Nylon Reinforced Nitrile
Options:
• Seals: EPDM, Viton, Teflon
• Class H
Rated Coil
• Latching Solenoids
Other voltages, coil constructions,
lead lengths and materials are available to meet special
requirements. |
