General Information:
The Industrial Line of valves provides the highest
reliability even under the most demanding of applications. the
I11series direct acting valves do not require a minimum operating
pressure, which allows them to operate from a "zero" inlet pressure
differential (MOPD). These valves also provide a bubble-tight
shutoff and work well with gasses, fluids, light oils and other
clean flowing media.
Mounting Position:
Any Position (best if vertical and
upright)
Actuation Response
Time:
10-40 milliseconds is
typical
Electrical Specifications:
Standard Voltages:
VAC 24/60,
110/50-120/60, 220/50-240/60, 440/50-480/60
VDC:12, 24, 48,
120
Coil Rating:
Continuous duty totally encapsulated
Class
F Rated 155°C; 311°F |
Voltage Tolerances:
+10%, -15% of applicable voltage
Standard Lead Length: 24"
Nominal Ambient Temperature Ranges:
-40°C to 65.5°C; -40°F to 150°F
Enclosure Options:
NEMA I (std)- Metal Housing
NEMA IV
- Watertight Housing
NEMA VII - Explosion-Proof
Housing
(All options come with 1/2" FPT Conduit
Connection)
DIN
- Form "A" Connection
Operating Modes Available:
Normally Closed - Closed when de-energized, open
when energized
Normally Open - Open when de-energized,
closed when energized
|
Valve Parts in Contact with Media:
Body - Brass, S/S T316
Core
Tube - S/S T305
Plunger and Core Plug - S/S
T430F
Shading Ring (AC unites only) - Copper (std);
Silver (special order only)
Springs - S/S
T302
Seals - Nitrile (std on Brass
valves);
Viton (std
on S/S valves)
Options:
• Seals: EPDM, Viton, Teflon
• Class H
Rated Coil
• Manual Override
• Latching
Solenoids
Other voltages, coil constructions,
lead lengths and materials are available to meet special
requirements. |
