(PVC)
Rust Proof and Corrosion Resistant
FLO-CONTROLET is completely rust proof and corrosion resistant. Field of
application is much wider than with metal controllers. Ideally suited for
use on commercial/industrial water treatment equipment, irrigation systems,
cooling towers and many other applications where a constant flow rate is
required and variable pressures are encountered. They are low in cost and
easy to install, requiring no adjustment or maintenance. Completely tamperproof,
yet easily altered in the field if increases or decreases in flow rate are
desired.
(PVC) Full Range of Sizes and Capacities
Sizes range from 1/2 inch to 6 inch including threaded, plain end and flanged
models. Flow capacities are available in increments
of 1 gpm from 5 through 540 gpm using BUNA (N) control inserts, Table
"B" under specifications and in various flow rates from 0.25
through 3.5 gpm, Table "A" and 12, 15 and 20
gpm, Table "C".
All models are capable of modification through simple substitution of different
rated control inserts.
(PVC DISC) Space Saver
The disc is a space saver and money saver, ideal to use where space is limited
and/or cost is paramount. Sizes range from 2 inch to 6 inch with flow rates
from 35 gpm to 540 gpm. |
(STEEL)
Extra Heavy Construction
For that rugged duty application. Flo-Controlet
is constructed with extra heavy galvanized steel housing which allows for
drilling and tapping for control pilot drains, instrumentation, etc. They
are low in cost and easy to install, requiring no adjustment or maintenance.
Completely tamperproof, yet easily altered in the field if increases or
decreases in flow rate are desired.
(STEEL) Full Range of Sizes and Capacities
Sizes Range from 3/4 inch to 6 inch threaded models.
Flow capacities are available in increments of 1 gpm from 5 through 540
gpm using BUNA (N) control inserts and in various flow rates from 0.25 gpm
through 3.5 gpm. All models are capable of modification through simple substitution
of different rated control inserts.
(BRASS) Two Models 1/2" Size
Use when mating valves and other appliances when use of dissimilar metals
is not appropriate. Available in one size, 1/2" NPT. Flow rates from
0.25 gpm to 10 gpm. |
Flow
Control Inserts
BUNA (N) 5-10 GPM Color Coded (other size inserts are not color coded)
Ensures are precision molded from material that can control accuracy of
plus or minus 10% when installed. The material complies with existing FDA
regulations for application in food handling systems. |
APPLICATION INFORMATION - IMPORTANT
These flow controllers are designed for liquids similar in
viscosity to water. All applications should be tested for flow characteristics
and chemical compatibility to insure desired results. Swelling of the individual
control inserts in certain liquids will result in loss of flow rate accuracy.
ONE YEAR WARRANTY
All Flo-Controlet controllers are warranted to be free from
defects in material and workmanship for a period of one year. Our liability
is limited solely to the replacement of defective merchandise.
Ordering Information
PVC model Flo-Controlet is available in threaded, plain end,
flanged and disc configuration.
Steel and brass model Flo-Controlet are available in threaded only.
To select the flow controller you need, consult the table below and choose
the model according to the desired diameter and flow rate. Find this model
number on the accompanying price list according to the prefix: TH for threaded,
PE for plain end, FL for flanged or ST for steel, BR1 or BR2 for brass.
Include this prefix when ordering a flow controller.
Example 1: If you want a 2" diameter PVC threaded controller, flow rate
45 gpm, specify Model TH-200-7 45 gpm.
Example 2: For a flow controller 3" diameter PVC plain end controller with
a flow rate of 90 gpm, specify Model PE-300-14 90 gpm.
|
You do not have to specify
the number of inserts. The factory will install the correct size and number
to give the flow rate you specify. Keep in mind that the flow rate for
3/4" through 6" flow controllers with flow rates from 5-540 gpm are in
one gpm increments; see Table B. The 1/2" and 3/4"
flow controllers for flow rates from 0.25 to 3.5 gpm are as indicated
in Table A. Model No. 100-1C is available in three flow
rates 12,15, and 20 gpm. See Table C.
|
Specifications:
|
 |
 |
 |
 |
| TREADED NPT |
PLAIN END |
FLANGED |
DISC |
| |
|
|
|
LENGTH "B" (INCHES)
|
|
Model
No.
|
Flow Rate
(GPM)
|
No. of
Inserts
|
Pipe Size
"A"
|
PVC
|
STEEL
|
PVC
|
BRASS
|
|
Threaded
|
Plain End
|
Flanged
|
Threaded
|
Disc
|
Threaded
|
|
050-1*
|
0.25 - 3.5
|
1
|
1/2
|
2
|
5
|
5
|
-
|
-
|
2
|
|
075-1
|
0.25 - 10
|
1
|
3/4
|
2
|
5
|
5
|
2-1/2
|
-
|
-
|
|
100-1
|
5 -10
|
1
|
1
|
3
|
6
|
6
|
3
|
-
|
-
|
|
100-1C
|
12, 15, 20
|
1
|
1
|
3
|
6
|
6
|
3
|
-
|
-
|
|
125-2
|
10 - 20
|
2
|
1-1/4
|
3
|
6
|
6
|
3
|
-
|
-
|
|
150-4
|
20 - 40
|
4
|
1-1/2
|
3
|
6
|
6
|
3
|
-
|
-
|
|
200-7
|
35 - 70
|
7
|
2
|
3
|
6
|
6
|
3
|
15/16
|
-
|
|
250-9
|
45 - 90
|
9
|
2-1/2
|
4
|
6
|
6
|
4
|
15/16
|
-
|
|
300-14
|
70 - 140
|
14
|
3
|
4
|
6
|
6
|
4
|
15/16
|
-
|
|
400-25
|
125 - 250
|
25
|
4
|
4
|
6
|
6
|
4
|
15/16
|
-
|
|
600-54
|
270 - 540
|
54
|
6
|
5
|
8
|
8-1/2
|
5
|
15/16
|
-
|
| * Model 050-1 Brass has two
models: BR1-050-1 (0.25-3.5 gpm) & BR2-050-1 (5-10 gpm). |
|
|
|
|
|
|
|
Inserts 0.25 to 4.0 GPM
Not Color Coded (Black)
|
|
Color Identification
of BUNA (N) Inserts
5 to 10 GPM
|
|
Inserts 12 to 20 GPM
Not Color Coded (Black)
|
|
0.25 GPM
|
1.40 GPM
|
|
|
12 GPM
|
|
0.40 GPM
|
1.60 GPM
|
|
5 GPM - Blue
|
|
15 GPM
|
|
0.50 GPM
|
1.80 GPM
|
|
6 GPM - Red
|
|
20 GPM
|
|
0.60 GPM
|
2.00 GPM
|
|
7 GPM - Brown
|
|
|
|
0.70 GPM
|
2.20 GPM
|
|
8 GPM - Green
|
|
|
|
0.90 GPM
|
2.50 GPM
|
|
9 GPM - White
|
|
|
|
1.00 GPM
|
3.00 GPM
|
|
10 GPM - Orange
|
|
|
|
1.20 GPM
|
3.50 GPM
|
|
|
|
|
|
