Specialty Resin
ProBlend™ Semiconductor

ProBlend™ Semiconductor: When it’s quality not quantity you’re after, there is no better choice than ProBlend Semiconductor grade resin. This is the perfect polisher, with each lot tested and certified to reach 18 megaohm water when challenged with with 10 megaohm water. This is also the choice for laboratory and cartridge applications.
Features
  • Designed to provide ultra-high purity water.
  • Low conductivity.
  • Low effluent TOC values.
  • High resistance.
  • Excellent regenerable capacities for inorganic and organic ions.
Physical Properties & Characteristics
Functional Structure
    *Cation: SO3H+ (hydrogen form sulfonated polystyrene copolymer)
    *Anion: R4N+OH- (hydroxyl form strong base alkyl quaternary ammonium polystyrene copolymer)
Physical Form Spherical beads
Ionic Form H/OH
Partical Size Distribution 16 to 45 nominal
    +16 mesh (U.S. Std.) <5 percent
    -45 mesh (U.S. Std.) <2 percent
Volume Ration (exhausted)
    *Cation: 1.0 parts
    *Anion: 1.55 parts
Total Capacity
    *Cation: 1.9 meq/mL (Na+ Form)
    *Anion: 1.4 meq/mL (Cl- Form)
Column Capacity 13.0 krg./ft³ minimum to electrolyte breakthrough
Moisture Content 60% maximum
pH Range 0 to 14
Metals Content as PPM by Weight of Dry Resin (Typical)
*Iron (Fe) <100 ppm
*Copper (Cu) <50 ppm
*Lead (Pb) <50 ppm
Percent Conversions to Ionic Form
*Cation H+ 99% minimum
*Anion OH- 95% minimum
*Cl- 2% maximum
*CO3-2 3% maximum
Approximate Sipping Weight 43 lbs/ft³ (720 g/l)
Standard Packaging 7 ft³ plastic lined fiber drums
Maximum Operating Temperature
*Non-regenerable 100ºC
*Regnerable 60ºC
Operating Flow Rate (Typical) 2 to 10 gpm/ft³
Effluent Quality Each lot tested and certified to reach 18 megaohm and to reach less than 50 ppb of TOC in less than 50 BV when challenged with 10 megaohm low TOC influent.

*CAUTION: DO NOT MIX ION EXCHANGE RESINS WITH STRONG OXIDIZING AGENTS.
Nitric acid and other strong oxidizing agents can cause explosive reactions when mixed with organic materials such as ion exchange resins.


Note: These suggestions and data are based on information we believe to be reliable. However, we do not make any guarantee or warranty. We caution against using these products in any unsafe manner or in violation of any patents. Further, we assume no liability for the consequences of any such actions.


Home | Products |Commercial & Industrial Systems | Residential Systems | Ultraviolet Systems | Resin | Filtration Systems | R.O. Systems | Filtration Media | Housings & Cartridges | Chemicals & Equipment