OPERATING PARAMETERS
Operating pressure: 12.4 - 15.2 bar
Minimum inlet pressure: 2.1 bar
Operating temperature: 4 - 29ºC
NOMINAL MACHINE IONIC REJECTION
95% - 98%
MEMBRANE HOUSING
304 SS, 20 cm inside diameter, 4-Port, 3-Long
MEMBRANE ELEMENTS
Osmo®-823-HR (PA)
CONNECTIONS
Inlet, permeate, and concentrate are PVC SOC type connections
STANDARD ECONOMY (ECN) FEATURES:
- Energy saving 37.2 m2 membrane elements
- SS high-pressure pipework
- 5-micron pre-filter and SS housing
- PLC control
- Lakewood Instruments™ 2450 controller
- Level control
- Automatic inlet shut-off valve
- Automatic flush system
- Pre-filter, post-filter, primary, and final pressure gauges
- Digital permeate and concentrate flow meters
- Digital conductivity meter External control capabilities
- ALARMS: Low inlet pressure, starter overload trip, high
temperature (41ºC), high permeate conductivity
|
FRAME
Epoxy coated carbon steel
CONTROL CIRCUIT
220 VAC, single-phase, 50Hz IEC, IP55 enclosure
PUMPS
Tonkaflo®, multi-stage, centrifugal pump
- SS shell/housing
- SS inlet/discharge castings
- Noryl* internals
MOTORS
3-Phase,TEFC, 380 VAC, 50Hz
DELUXE (DLX) FEATURES -In Addition to ECN Features
- Digital pH controller system
- Chemical dosing system
- Clean-In-Place pump plumbed, wired remote tank
- Permeate purge
- Permeate purge disable capabilities
- Remote data interface via Lakewood and modem
- ALARM(S): High permeate pressure, high/low pH Flows,
conductivity, pH and temperature readings can be also monitored remotely via
modem, and data can be downloaded to a computer and/or printer. *Noryl is a
trademark of the General Electric Company.
|
