| Corrosion-Resistant Fiberglass Pumps | Pumps |
| Fybroc Series 1500 Horizontal Pumps |
| Fybroc Series 1500 fiberglass pumps, in capacities up to 4500 GPM, provide exceptional structural integrity, excellent corrosion resistance and dependable service in difficult operating conditions. Close-coupled modes are also available as a Series 1530. Materials available for corrosion resistance include: | ||
| + VR-1 | Vinyl ester resin (standard) - resistant to most acids, caustics, bleaches, sea water and other liquids | |
| + EY-1 | Epoxy resin - solvent resistance | |
| + VR-1S | Moderate abrasion resistance from solids such as crystals and light silt | |
| + VR-1A | High abrasion resistance from solids such as titanium dioxide or fly ash | |
| + VR-1V | Protective synthetic for applications such as hydrofluoric acid which attacks fiberglass | |
| 60 HERTZ available in 1150 RPM, 1750 RPM, 3500 RPM | 50 HERTZ available in 1450 RPM and 2900 RPM |
| Fybroc Series 1600 Self-Priming Pumps |
| These pumps are ideally suited for corrosive waste sump applications, tank car unloading and other demanding services. The generously proportioned casing provides short priming times without the use of flappers and check valves. The pumps flexible stuffing box design accepts a variety of shaft sealing configurations. Close-coupled models are also availble as a Series 1630. |  |
| 60 HERTZ available in 1150 RPM, 1750 RPM, 3500 RPM | 50 HERTZ available in 1450 RPM and 2900 RPM |
| Fybroc Series 5500 Vertical Pumps |
| These pumps are designed to handle tough applications such as chemical wastes of varying pH, plating wastes, circulation of pickling liquor, electrolytes or plating baths, salt water or brine, and hundreds of other difficult sump pump services. The choice of materials is the same as for Series 1500 above. The pump shaft and bolts are furnished in materials selected for the specific application; typical materials are 316 stainless steel, alloy-20, titanium, or Hastelloy C or B. The unique sleeve bearing is clamped to the column with fiberglass bolting. |  |
| 60 HERTZ available in 1150 RPM, 1750 RPM, 3500 RPM | 50 HERTZ available in 1450 RPM and 2900 RPM |
| Fybroc Series 6000 Recessed Impeller Vertical Pumps |
| In heavy duty pumping applications which combine suspended solids and corrosive fluids, ordinary centrifugal pumps will not do. Fybroc Fiberglass Pumps with Recessed Impeller design overcome both problems: clogging and corrosion. These pumps handle sludge, sewage and other chemical waste fluids with large or stringy solids. They are proven in applications such as chemical, pulp and paper, refinery, utility and waste treatment. |  | |
| + Tensile strength: 8,000 to 75,000 psi + Weight: 25 to 50% less than metal + Galvanic corrosion is eliminated + Noise level reduced by fiberglass |
+ Flexural strength: 30,000 psi
+ Non-magnetic, non-sparking, non-galling + Not affected by temperatures up to 210o F + Outlast metal by years | |
 Pumps
Page(Fluid Handling Pumps) |
 Return to:CIE
Product Listings
|
 Contact
CIE: cie-inc@worldnet.att.net |
| Return to:Table
of Contents
|
 Return
to Home Page |